Clearly the best sounding W3's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output. W3v3's are available in single 2 ohm, 4 ohm and 8 ohm versions (6W3v3 available in 4 ohm and 8 ohm only) and are superb performers at medium power levels in compact sealed or ported enclosures.

 

Multiple patented technologies enhance performance and reliability. As with JL Audio's flagship drivers, development was guided by JL Audio's proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.

 

A mineral-filled polypropylene upper cone body with a metallic JL Audio logo medallion provides a classy new look, while a removable (and customizable) mounting flange trim ring receives grille-mesh inserts directly, without the need for additional grille hardware. (Grille mesh inserts are sold separately.)

 

 

	10W3v3-4
Free Air Resonance (Fs):	31.49 Hz
Electrical “Q” (Qes):	0.523
Mechanical “Q” (Qms):	7.017
Total Speaker “Q” (Qts):	0.485
Equivalent Compliance (Vas):	1.138 cu. ft. / 32.23 liters
One-Way, Linear Excursion (Xmax)*:	0.550 in. / 14.0 mm
Reference Efficiency (no):	0.185%
Efficiency (1W/1m)**:	84.87 dB SPL
Effective Piston Area (Sd):	53.475 sq. in. / 0.0345 sq. m.
DC Resistance (Re):	3.567 ohm
Nominal Impedance (Znom):	4 ohm
Thermal Power Handling (Pt):	500W
Driver Displacement:	0.049 cu. ft. / 1.39 liters
Net Weight:	12.25 lbs. / 5.56 kg