Alpine MRP-T222 1/2 Channel Power Amplifier

Description:

Features of the Alpine MRP-T222

• 1/2 Channel Operation
• BassEngine®
• Subsonic Filter
• Bass EQ Circuit
• Crossover (HP/LP)
• MOSFET Power Supply
• DC-DC PWM Power Supply
• Discrete Pre-Amp Stage
• Double Buffered Pre-Amp Input Circuitry
• STAR Circuitry
• MultiMode™
• Top Mounted Blue LED Power/Status Indicator
• Duo B Feedback Circuitry
• Continuously Adjustable Gain Control
• Speaker Level Inputs
• Gold Plated Power Screw Terminals
• Gold Plated Speaker Terminals
• Cross-Vented Chassis Design

Specifications

• CEA-2006 Power Rating
• CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 50W x 2
• RMS Power (at 14.4V THD+N, 20Hz-200Hz)
• Per channel into 4 ohms: 50W x 2 (0.08% THD)
• Per channel into 2 ohms: 70W x 2 (0.3%)
• Bridged 4 ohms: 140W x 1 (0.3%)
• Total Max. Power: 250W
• BassEngine® Sound Tuning
• Crossover Network: 18dB/oct
• Low/High Pass Crossover Frequency (Fixed): 80Hz
• Subsonic Filter (Fixed): 20Hz
• Bass EQ Frequency (Fixed): 50Hz
• Bass EQ Level (Adjustable): 0 - 12dB

General

• Power Requirements: 14.4V DC (11V to 16V)
• Frequency Response: 10Hz – 50kHz (+0, -1dB)
• Signal to Noise (S/N): 100dBA (referenced to rated power)
• Input Sensitivity (For Rated Power): 0.2V to 4.0V
• Slew Factor: Greater than 5
• Input Impedance: 10k Ohm
• Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
• Dimensions (WxHxD): 172mm x 60mm x 267mm
• Dimensions (WxHxD): 6-4/5” x 2-2/5' x 10-1/2”
• Weight: 1.95 Kg. (4 lbs. 5 oz)

In multi-speaker systems, it is important to make sure each speaker is sent only those frequencies it is designed to reproduce. This built-in crossover removes overlapping frequencies, ensuring greater efficiency, less strain—and a louder, cleaner sound.

The four-channel amp has independent RCA inputs for each channel. Internally, these are summed for the right and left signals to provide non-fading outputs for applications such as a separate subwoofer amp.

The power supply uses MOSFET circuitry to convert battery voltage to the voltages needed for high amplification. The result is higher power and much wider dynamic range.

These terminals allow direct connection to factoryinstalled head units that don’t have preamp outputs, letting you add subwoofers to any system.

This processing circuit provides optimum low frequency response, letting you adjust the bass for maximum clarity.

The rugged, road-worthy V-Power amplifiers deliver exceptionally high performance and provide detailed control. Available in mono, two-channel and four-channel configurations, these amps are as powerful as they are versatile.

Price: £68.99

• Tell a Friend